Christmas In July – Stamp It Group Blog Hop

Welcome to Stamp It Group Christmas In July Blog Hop!

Thank you for joining me today for our Christmas celebration! I am excited to have you here!

My name is Mikki Winebrenner and today I have a fun and simple Holiday card for you using Stampin Up Online Exclusive stamp set Scenic Pumpkin Patch.

Yup you read that right, I used a fall set to create this nostalgic feeling Christmas card front. I wanted to keep things as simple as I could and using a stamp set in different ways is always a great way to save time and money!

Christmas is my favorite holiday and I am already asking if I can put my decorations up and when is it going to snow! Speaking of snow, if you look close you can see a little bit of snow throughout this card. How did I make this happen? White Pearlized Enamel is how!!

I did not take step by step photos of the process of this card. I did however grab one so you could see how I stamped things out before putting it all together.

Lets jump on into the details!

Cutting & Scoring:

Mossy Meadow 8-1/2” x 11” Cardstock: 5-1/2” x 8-1/2” scored at 4-1/4”

Iconic Celebrations 6” x 6” DSP: 4-1/8” x 5-3/8”

Basic White 8-1/2” x 11” Cardstock : 4” x 5-1/4” (x2), 3-3/4” x 5”

Cherry Cobbler 8-1/2” x 11” Cardstock : 4” x 5-1/4”, 1” x 1” cut diagonally to make 4 little triangles.

There is a full list of products below with links and product numbers. There is also a full list of product and the measurements on the PDF file.

In the photo above you can see that I stamped all the images with Pecan Pie ink. In some places I used second generation stamping and in others places, such as the fencing, I actually stamped the images twice to make it darker.

I used the cloud stamp in the set in front of the fencing to give it a feel of piles of snow around the fence line or falling onto the side of a dirt road.

Then I added a little but of Pecan Pie along the edges of the entire piece to give it the sepia effect.

Fun fact! Or trick, I’m not really sure which way it goes but, on the bottom portion of the snow on the fence I used my finger to blend the ink in to give it a better transition and smooth out the harsh lines! A little messy but super effective.

I also used the fence stamping on the second piece of white for the inside of the card. Again, with the blending brushes adding in a little hint of color for an old paper feeling.

Stamp the sentiment with Mossy Meadow above the trees. The sentiment I used is from the Online Exclusive set So Very Merry.

For the snow look I used the White Basic Enamel along the snow lines or any lines that looked like they needed to pop a bit. I also added some to the top of the fence posts, barn and corners of the trees.

Last for the enamel I did small dots all over the card to give a snowfall look. Let the enamel dry for just a few minutes. The thicker the enamel is the longer it takes to dry.

Once you assemble the card front, I just added on those little triangle pieces in the corners to give it more of a photo effect. You do not have to do this step, it looks great with or without them!

That’s all there is to the card. I do have a PDF file for you to download and print.

                                   👇🏻Downloadable PDF👇🏻

Christmas in July – Stamp It Group Blog Hop

 

I hope you enjoyed my project! I’ve really enjoyed “hopping” with you all!

Please make sure you leave a comment to be entered to win Stampin’ Up Birthday Sparkle Kit!

Visit each of the blogs on this hop and comment on them as well for more chances to win!!

Congratulations to last months winner!!

Head on over to the next blog by clicking “Next Blog” below to find more Holiday Themed card creations!

Happy Hopping!!

Product List

Stamp It Group Summer Fun Blog Hop


Welcome to Stamp It Group’s Summer Fun  Blog Hop!

I’m so excited for you to be here today with us! My name is Mikki Winebrenner and I have a fun summer themed card for you today using Stampin’ Up To Market Suite Collection. 

A little back story for you as to why I chose this Suite for a Summer Fun Blog Hop. When To Market was released I was super excited because my daughter and I attend our local Farmer’s Market every week during the summer and fall as vendors.

We have such a good time meeting new people, visiting with old friends, being present in our community supporting an amazing weekly event and just being outside. A bonus for us is that we have a beautiful garden in the market area.

Let jump on into this beautiful card I have for you. I will not be giving a photo walk through of the build of this card. Silly me only took 3-4 pictures of the process! OOPS!!! While the card itself looks a little complex, the hardest part is putting the basket and bag together!

Some products you will need are: Real Red, Pumpkin Pie, Blackberry Bliss, Garden Green and Pecan Pie Classic Stampin Pads. The entire To Market Suite Collection, Natural Polka Dot Trim and Linen Thread. 

There is a full list of supplies below with links to the products.

The cardstock measurements are:

Garden Green 8-1/2” x 11” Cardstock: 4-1/4” x 11” scored at 5-1/2”

Blackberry Bliss 8-1/2” x 11” Cardstock: 3-3/8” x 4-5/8”,  1/2” x 4-1/4”

To Market 12” x 12” DSP: 4” x 5-1/4”, 1-1/4” x 3-1/8”, 1” x 4-1/4”, 2-3/4” x 4-1/4” (x3), 2” x 2”

Basic White 8-1/2” x 11” Cardstock: 3-1/4” x 4-1/2”

Scraps of Basic White and Pecan Pie for stamping images and sentiment. 

The few photos I do have for you are actually very beneficial for those of us who are visual people. As I mentioned earlier, the building of the basket and the bag are the hardest steps in this card. Below are the images with explanations of what I did.

This isn’t really a fun fold card but it does have a fun feature on the inside. I created a pocket with the DSP and there is an insert that can be pulled out and written on. I really like having an opportunity to write a special message in a card and this allows for that.

I have a tutorial PDF free to download with the process of how I put the card together as well as all the products and measurements used.

👇🏻 Downloadable PDF 👇🏻

Summer Fun Blog Hop – To Market

I’ve really enjoyed “hopping” with you all!

Please make sure you leave a comment to be entered to win a Stampin’ Up! Colorful Kaleidoscope Kit! Such a fun kit!!

Congratulations to last months winner!

Hop onto each of the blogs  and leave comment there as well for more chances to win this super fun kit!

Happy Hopping!!

Stamp It Group Father’s Day Blog Hop

Welcome to Stamp It Group’s Father’s Day  Blog Hop!

I’m so excited for you to be here today with us! My name is Mikki Winebrenner and I have a fun fold easel Father’s Day card for you today using Stampin’ Up Gone Fishing Stamp Set and Dies!

Be sure you leave a comment below for a chance to win a Stampin’ Up Birthday  Sparkle  Kit!

I debated a on what card to do for this Father’s Day hop. I had so many ideas of different styles and types of cards to do. I settled on this fun fold tackle box card.

I chose to use the Gone Fishing set because my dad is a HUGE fisher! He would live on the water in his boat if we would let him! Most weekends during fishing season if we cant find him we just have to looking in his favorite spots. It’s the “Where’s Waldo” Father Edition 😂

Let’s jump on into this card. There are a lot of parts and pieces to this one but I promise you it is pretty smooth sailing so to speak.

Some products you will need are: Real Red, Pumpkin Pie, Lemon Lime Twist, Smokey Slate, Summer Splash, Coastal Cabana and Shy Shamrock Classic Stampin Pads. Memento Tuxedo Black ink and So Swirly Embossing folder.

There is a full list of supplies below with links to the products.

The cardstock measurements are:

Shy Shamrock 8-1/2” x 11” Cardstock: 5-1/2” x 8-1/2” scored at 2-1/8” and 4-1/4”, 4” x 5-1/4”, scrap piece for sentiment.

Wild Wheat 8-1/2” x 11” Cardstock: 4-1/4” x 5-1/2”

Window Sheet: 4” x 5-1/4”

Basic White 8-1/2” x 11” Cardstock: 4” x 5-1/4”, 1 full sheet for stamping images.

Silver Foil: scrap pieces for hooks and tackle.

I have a quick run down on how I did this card below in the gallery.

I’ve really enjoyed “hopping” with you all!

Please make sure you leave a comment to be entered to win a Stampin’ Up! Birthday Sparkle Kit! Such a fun kit!!

Congratulations to last months winner!

Hop onto each of the blogs  and leave comment there as well for more chances to win this super fun kit!

Happy Hopping!!

 



Blog Hop Index



Product List

Cap & Gown Graduation Series

Hello Everyone! I know graduations are sneaking up on everyone at what seems to be a rapid pace!  We have my daughter graduating from college this weekend! Im still wrapping my head around that one!!

With all the festivities in mind I wanted to give you some last minute ideas and inspiration for a quick graduation card. I will be using Stampin’ Up!’s Cap and Gown Cling Stamp Set.

Planning these out I thought it would be fun to really focus on our local community schools and branch out just a tiny bit into the surrounding areas as well as my daughters University.

The 4 card designs I will show you this week will have 6 different color combinations. I also have 1 card design that I only have one color combination for. We might just sneak in super fun explosion box as well!!

Let’s get going on these cards. I tried to keep them fairly simple for everyone. Please remember that the color combinations can be changed to do any color that is needed!

Our first card is a slim line card using Stampin Up’s Cap and Gown Cling set as well as Stampin’ Up Alphabet A’la Mode Dies – Just the numbers!

Slim line cards have a very different measurement than the standard cards. This also means you will need a different kind of envelope. I will touch on that at the end!

Measurements for this card (I will only be using the colors for one card in the measurements!) :

Basic White Cardstock: 7” x 8-1/2” scored at 3-1/2” – base of the card

Basic Black Cardstock: 3-3/8” x 8-3/8”

Poppy Parade Cardstock: 3-1/4” x 8-1/4”

Basic White Cardstock: 3-1/8” x 8-1/8”

After you cut your paper to size and score your base, pull out the numbers 0,2 and 4 from the Alphabet A’la Mode Dies. Line up the numbers in order 024 at the bottom of the 3-1/8” Basic White. Once you have that lined up, cut the numbers out with the Stampin’ Cut & Emboss Machine. Run it through again with only the number 2 at the beginning of the number sequence.

      *SAVE THE NUMBERS!!! I use them in the next card tomorrow!!

As an alternative for the numbers, if you want to simply things even more, you can stamp the 2024 at the bottom of the same piece with the school color – for this sample I would use Poppy Parade stamp pad.

Stamp the word “CONGRATS” at the top of the 3-1/8” Basic White piece and “CLASS OF” above the numbers, both in Tuxedo black.

        ** Funny story: my “Class Of” saying is different from the one in the stamp set because me the brilliant one that I am lost my stamp shortly after pulling it out. The renegade stamp has been discovered and returned to it’s proper place.

Next stamp the robe in the school color of choice and the cap in black or the second school color.

On the inside of the card you will want to stamp your sentiment: I used the sentiment “you did it!”, and stamped it in tuxedo black in the center. I also grabbed the scroll stamp and stamped it directly under the words as well as in the outer two corners.

Let assemble this card up!!

You will want to use your preferred adhesive for this, I love my Multipurpose Liquid Glue. It is so forgiving and gives you just a little time to adjust the paper as you need.

Again, I am doing only color combination but the concept is the same for all of them.

Attach the 3-1/8” Basic White to the 3-1/4” Poppy Parade cardstock.

Attach the Poppy Parade to the Basic Black and then attach to the Basic White card front.

Easy Peasy!

To add just a little bit of a pop to the card, grab those iridescent foil gems and lets change the colors!

Grab the Stampin’ Blend that coordinates with your colors – Dark Poppy Parade and Dark Basic Black for me- Color 2-3 gems in those colors. Simply “paint” them with the blends. Let them dry for a few seconds and now you have custom color Iridescent Foil Gems.

Attach those around the card and we are all done.

For the envelope:

You have a couple options here. You can use a legal length envelope that you can purchase at a store or you can make your own with DSP. They are super simple to make.

Here is a downloadable template for you. I am a visual person so hopefully this will help.

Slime Line Envelope Template

As a mom with a graduate I understand how busy crazy things are getting right now. With that in mind I would also like to offer you an option that I normally would not do.

I have a bunch of these already made up in a variety of colors. If something catches your eye and you would really like to make it but have no time, reach out to me and we can work something out. All of these are available for purchase.

I will be back tomorrow with another fun and simple card for you! Below you will find the entire list of products I used with links to them in my store.

Happy Stamping!!

Product List

Stamp It Group Mother’s Day Blog Hop

Welcome to Stamp It Group’s Mother’s Day  Blog Hop!

I’m so excited for you to be here today with us! My name is Mikki Winebrenner and I have a gorgeous Mother’s Day card for you today using Magnolia Mood Bundle. I’m also slipping a new preview of one of the new In Color’s Peach Pie!

Be sure you leave a comment below for a chance to win a Stampin’ Up Confetti Birthday Card Kit!

When I think of Mother’s Day I always think of flowers. I think it comes from when my kids were young they would always have some kind of flower for me for Mother’s Day.  By some kind of flower I mean paper, real, weed, drawing… there was a definite variety but loved equally.

I knew I wanted to use the Online Exclusive Magnolia Mood Bundle for this card as it has quickly become a favorite of mine. However, I have been at a complete loss for ideas!

I thought it would be fun to slip in my technique to help get the creativity flowing. Being such a visual person I have found that making idea boards or inspiration boards with a bundle or suite.

This is the one I created for the Magnolia Mood Bundle when I first ordered it. You can also see the I have laid out the colors I wanted to use. I was finally able to come up with the design I have for you today.

I’ve also been color obsessed recently so brace yourself, there is a lot of coloring involved!!

Some of the products you will need are: Peach Pie Cardstock (You can substitute this with Petal Pink), Calypso Coral, Old Olive and Basic White Cardstock. You will also need those coordinating Stampin’ Blends. Memento Tuxedo Black Ink and Calypso Coral Stamp Pad.

There is a full list of supplies below with links to the products.

The cardstock measurements are:

Peach Pie 8-1/2” x 11” Cardstock: 5-1/2” x 8-1/2” scored at 4-1/4”

Calypso Coral 8-1/2” x 11” Cardstock: 4-1/8” x 5-3/8”

Old Olive 8-1/2” x 11” Cardstock: 4” x 5-1/4”

Basic White 8-1/2” x 11” Cardstock: 3-7/8” x 5-1/8”, 4” x 5-1/4”, 1 full sheet for stamping images, scrap piece for sentiment.

Let’s dive in with a quick run down of how I created this. Again, A LOT of coloring!

                                                                          👇🏻DOWNLOADABLE PDF👇🏻

Mothers Day Blog Hop – Magnolia Mood

Hopefully I have inspired you today and gave you some Mother’s Day inspiration!

I’ve really enjoyed “hopping” with you all!

Please make sure you leave a comment to be entered to win Stampin’ Up Confetti Birthday Card Kit

Congratulations to last months winner!

Hop onto each of the blogs  and leave comment there as well for more chances to win this super fun kit!

Happy Hopping!!



Product List

Easter Week Excitement!

Hello everyone! I am terribly sorry to have missed everyone last week at the Easter Blog Hop! We had an emergency with my son and spent most of the day at the hospital 😔 He is doing better now and I am finally able to get this amazing card up for you all!

I wanted to kick off the Easter week with something unique and fun. With that said I have for you this really awesome card using Stampin’ Up! Excellent Eggs Bundle and a fun Basket Weave technique!


Let’s just dive right in with this card. I didn’t get all the pictures I wanted to for this process, I admittedly was to excited that it was working and going so well!!🤪

Some of the products you will need are: Excellent Eggs Bundle, Small Blending Brush, Stampin’ Cut & Emboss Machine, StazOn Jet Black Ink, Soft Sea Foam, Pool Party, Bubble Bath, Petal Pink and Pecan Pie Classic Stampin’ Pads, Rainbow Adhesive Dots and Linen Thread. I will have a complete list below with links to them directly in our store.

I didn’t mention paper needed because there is actually a lot of paper, or it seems like a lot at least. Here is what was used in my card, the colors of ink and paper are truly a preference though. My goal was spring pastel colors but you can change things up to however you want to. The measurements will be the same and that is the important part!!😉

Cardstock: Scraps of Pool Party, Lemon Lolly, Petal Pink, Bubble Bath, Sea Foam Green and Fresh Freesia.
Basic White 8-1/2” x 11” Cardstock: 2” x 5-1/4” (x2), scrap for sentiment
Scraps of Oxidized Copper 12” x 12” Specialty DSP and Distressed Gold Paper
Crumb Cake 8-1/2” x 11” Cardstock: 1/4” x 5-1/2” (x25) and 3/4” x 5” – scored at 2-/2” (x5)
Pecan Pie 8-1/2” x 11” Cardstock: 2-1/8” x 5-1/2”

For the basket, I have a quick video for you. It’s not hard at all just complicated to try and explain through words. Being a visual person myself, I always find “show me” to be the best option when possible! 🙃

Basket Weave Video Clip

In this video I am using Tahitian Tide, Parakeet Party and Starry Sky cardstock. I wanted to make it bright and different colors so you could see it better than the crumb cake.

After I assembled my basket of eggs I had this really big feeling that I forgot something. Sure enough, I absolutely did forget a rather important step 🙊

BEFORE you add the eggs to the card, grab a small blending brush and apply some Pecan Pie to the edges of the basket. The goal is to give it depth and make it look less flat. At the very end you will see that I have add lines under some of the pieces, I was attempting shadows that you would find in the layers of the weave. It didn’t end up perfect however the effect is still there.

Let’s get to the rest of the card and cut out some eggs! LOTS OF EGGS!!

I had a couple of moments of pure UH OH happen at this point in the card. Scary how happens when your almost done!

First the actual UH OH I had was that I placed one of the inside panels on upside down. Yup I’m awesome that way and we are just gonna leave it and see if the recipient notices!! 🤦🏼‍♀️

Second was more of a smack of forehead – How is the card going to stay closed? Brilliant time to think of that right!! A quick fix for this was to add little itty bitty magnets to the inside. Not everyone has this microscopic thingys just laying around so another option would be to actually tie a ribbon around it when you are completely finished. 🫣

To finish off the front of the card, I stamped Happy Easter in Soft Sea Foam and fussy cut it out and attached an extra gold bunny behind the sentiment with some Linen Thread to the back of the bunny. Attach the entire sentiment piece to the bottom of the egg we attached earlier. Lastly, I added in some Rainbow Adhesive-backed Dots to the top of the basket for just a little extra decoration.

 

And that is the creation of my Egg Basket Easter Card!

I hope this inspires you for any last minute card ideas you might need. I will be getting a few more Easter/Spring cards up this week to help get you inspired for Spring!!

Thanks for hanging out with me today! Please reach out with any questions. I know I threw a lot out at once! I do not have a PDF for this particular design, but if requested I will certainly get one written up!

Happy Stamping!!

Product List

Excellent Eggs with Hidden Surprise!

Excellent Eggs Easter Card that has a hidden surprise!

Curious? I would be too. This card started off as a simple easy card using Stampin’ Up!’s Excellent Eggs Bundle and the Easter Bunny Punch.

My brain must have had other ideas because one thought led to another and then 💥 things exploded into this:

This is card does have many layers to it so mailing it may be a bit tricky but it is a super fun card to give to anyone!

Let’s take a closer look.

You can see that the egg itself pulls out and behind it is another bunny with a special message.

Leaving the card as a standard card also provides a space for you to sign and personalize just as you would with any card!

You can also change the sentiments up a bit and use it a Birthday Card, Celebrate, Think of You or even Happy Spring!

This collage shows you the thickness of the card as well as how it looks with the egg in place and with it out.

It looks to a little complicated right? It’s not at all! It’s all in layers and using dimensionals to separate them and give them height.

The measurements are:

Lost Lagoon: 4-1/4” x 11” scored at 5-1/2” and 3” x 4”

Berry Burst: 4-3/16” x 5-7/16”

Pretty Peacock: 4-1/8” x 5-3/8”

Very Vanilla: 4” x 5-1/4”, 3” x 4” (x2), scrap pieces for 2 small egg cutouts and a small bunny

Masterfully Made DSP: 4” x 5-1/4”

There is a complete list of product used below or you can head on over to my store and check out all the fun Easter and Spring Items we have available.

Cut out a large egg from all the pieces of card stock and DSP using the 3” x 4” of the Lost Lagoon and only use one of the 3” x 4” Very Vanilla. Make sure the cut is where you want the placement to be for the egg. Set the negative space aside as we will use them to build the card base.

When I cut mine out, I used a pencil to mark the top and bottom of the egg die so I knew where to put it.

Punch out the Easter Bunny from all of the eggs and set them aside. Stamp a Bunny from the Easter Bunny set onto the Very Vanilla before punching. We will be using him later on.

Stamp the large egg onto the last 3” x 4” Very Vanilla. Also stamp the small bunny on a scrap piece. Color in the bunny and the background of the egg if you want. I used Lemon Lolly, Soft Sea Foam, Petal Pink and Smoky Slate Light Blends to do this.

Also stamp 3 or 4 of the medium eggs onto the bottom of the 4” x 5-1/4” using Lost Lagoon ink. As well as your sentiment in the center. Set that aside for later or you can attach it to the inside of the card base.

Cut out the Bunny, Large egg and 2 of the smaller egg. Keep the negative of the small egg, you will need them for the next step.

Color the negative pieces of the small eggs with the blends. I used some old Mica Powder to add a shine to the eggs, this is optional if you have it. You can really decorate them however you want.

Attach the large Very Vanilla, Lost Lagoon and Pretty Peacock eggs (int that order) together, lining up the punched out bunny with Stampin Dimensionals.

Attach one of the small eggs and their negatives to the right side of the stamped large egg with liquid glue. Then attach that as the final layer of the egg ornament.

Attach the small bunny inside the punched bunny with dimensionals.

If you want you can add the Berry Burst egg to the back of the egg to hide any blemishes or just leave as is.

Attach cardstock layers to together from top to bottom, Berry Burst, Pretty Peacock and the DSP with Stampin’ Dimensionals. Attach that to the card base also with dimensionals.

Carefully stamp a saying inside the egg, I used Lost Lagoon ink and the sentiment “An Easter Treat for You”. Attach the Very Vanilla bunny that you punched and stamped with liquid glue just below the sentiment.

Stamp “Happy Easter” on the small egg with all the negative pieces in place, with Lost Lagoon. Attach that to the upper right side of the card front with liquid glue.

Tie a piece of Linen Thread to the egg, wrapping it between layers to keep it somewhat hidden. Tie it off at the top to create a loop for hanging.

Place the egg inside the cut out on the card base.

Add in some Blooming Pearls and thats that!

I hope I  have given you  a little inspiration for something fun and unique for your Easter need. I am really happy with how this card turned out and super excited for you all to try it!

Join us tomorrow evening 6pm CST for Stamp It Group’s Easter Blog Hop where you can get even more fun inspiration and ideas!!

See you then!

Happy Stamping!!

 




Product List

Stampin Group Spring Fling Blog Hop

Welcome to Stamp It Group’s Spring Fling Blog Hop!

I’m so excited for you to be here today with us! My name is Mikki Winebrenner and I have a super fun spring theme card for you today using Cutest Cows Bundle. 

Be sure you leave a comment below for a chance to win a Stampin’ Up Confetti Birthday Card Kit!

I was having a hard time coming up with anything spring. Here in Iowa it’s nice, warm and sunny with no snow, absolutely not normal for February! Still a bit skeptic that it will stay “Spring Like”.  But the birds are singing, no shoveling required and the dogs are happy to be outside playing.

Thinking on spring and being outside with the doggo’s I see new buds blooming here and there, some new grass attempting to come through and this gave me the idea of using the Cutest Cows Bundle for a spring theme. Spring is all about new life coming to bloom, which includes those adorable calf’s we see in the fields!

For this card all you need is:

Cutest Cows Bundle, Meandering Meadows 6”x6” DSP, Balmy Blue, Garden Green, Granny Apple Green Cardstock and Ink, Basic White Cardstock, Tuxedo Black Ink, Stampin Blends and Liquid Glue.

There is a full list of supplies below with links to the products.

Measurements for the paper are a little different than normal . The card I did is a bit larger then a standard, the good news there is you can use an A6 envelope if you don’t want to make one!

The measurements are:

Balmy Blue 8-1/2” x 11” Cardstock: 6-1/4” x 9” scored at 4-1/2”

DSP: 4-1/4” x 6” and scrap pieces for the lettering

Garden Green and Granny Apple Green 8-1/2” x 11” Cardstock: 3” x 6”

Basic White 8-1/2” x 11” Cardstock: 4-1/4” x 6” and scraps for the cows and sentiment.

I am very much a visual person and have the process of the card coming together here for you in a gallery so you can come back and reference it as you need to. I tried to give little details on what is happening in each picture.

I also included a couple of tips for you that I have found make things a little simpler.

                                                                          👇🏻DOWNLOADABLE PDF👇🏻
Spring Fling Blog Hop – Cutest Cows

Hopefully I have inspired you today and gave you warm Spring thoughts!

I’ve really enjoyed “hopping” with you all!

Please make sure you leave a comment to be entered to win Stampin’ Up Confetti Birthday Card Kit

Congratulations to last months winner!

Hop onto each of the blogs  and leave comment there as well for more chances to win this super fun kit!

Happy Hopping!!



Blog Hop Index


Product List

Valentine Hop

Welcome to the Stamp It Group Valentines Day Blog Hop!

I’m so excited for you to be here today with us! My name is Mikki Winebrenner and I have a fun Valentine themed card for you today using Stampin’ Up Bee Mine Suite Collection.

Be sure you leave a comment below for a chance to win a Stampin’ Up Confetti Birthday Card Kit!

I decided to do a different type of card for my college students this year. My daughters roommates are all avid readers and I thought doing a little valentine for them that could also be used in other ways would be spot on for them.

Of course I cant just leave it at a cool card! I added in a square pillow box filled with goodies. These pillow boxes are a part of the Suite Collection or they can be purchased separately. They are super fun and the perfect size!


While the card looks a little complicated, it’s actually really simple. I think the hardest part I found was lining up the darn circles!!

For this card all you need is: Bee Mine Suite Collection, Daffodil Delight Cardstock and Ink, Sweet Sorbet Cardstock and Ink, Memento Black Ink, Vellum and Basic White Cardstock.

Measurements are:

Sweet Sorbet 8-1/2” x 11” Cardstock: 4-1/4” x 5-1/2”, 3-3/8” x 4-3/8” and 3” x 3”

DSP: 4” x 5-1/4” and 6”x6” – score at 3” to make 4 squares

Daffodil Delight 8-1/2” x 11” Cardstock: 4-1/4” x 6-1/2” – score @ 3-1/4”

Basic White 8-1/2” x 11” Cardstock: 3-1/8” x 4-1/8”

You will also need scraps of Daffodil Delight and Vellum Cardstock

I am not going to go into a lot of detail for how I made these. I am working on  a downloadable PDF for you with step by step instructions and a full supply list and photos!

I will be 100% transparent and say I actually forgot to take pictures as I was creating this card. I was a little to excited how it was all coming together! Whoopsies!! I am distracted easily by fun things 😂

The file will be uploaded later this evening for all of you!

I hope this card inspires you for a creative card idea for your Valentine!

👇🏻DOWNLOADABLE PDF👇🏻

Bee Mine Suite Collection Card

I’ve really enjoyed “hopping” with you all!

Please make sure you leave a comment to be entered to win Stampin’ Up Confetti Birthday Card Kit!

Congratulations to Last Months Winner!!

Hop onto each of the blogs  and leave comment there as well for more chances to win this super fun kit!

Happy Hopping

Supply List

Blog Hop Index


Product List

12 Days of Christmas Projects!

I am very much behind the clock with my 12 Days of Christmas project for you all. We started on December 5 over on Facebook and Instagram. Life has been super chaotic and I haven’t had a chance to get them up here for you guys. I will correct this over the weekend!!

I will group these together in 3 day batches to make this simpler. I am working on a full Tutorial for all the projects. I am using a new program for that and it’s definitely been a learning curve but I’m slowly figuring it all out.

Lets dive straight into the first 3 days of our 12 Days of Christmas Projects!

Day 1 of our 12 Days Of Christmas Projects, I wanted to keep things simple for our first one. These luminaries are not only gorgeous but super simple to make and take very little materials.

Luminaries are actually a fun project in general, not just during the Christmas season but year round. You can customize these to whatever holiday, special occasion or favorite things (😉 snowflakes are my favorite!)

I was very excited how they turned out, especially the star one, that was a last minute lets try this idea! The manger scene is actually the negative of a die that I used as a stencil! I will have a tutorial for you on everything you need to know about this project, including how I did that silhouette!

—————————————————————————————————————————

Day 2 of 12 Of Christmas Projects!
This second project is a simple hanging sign for your home or as a gift. There is a little story behind these, I wanted to do a simple hanging, as you can see they absolutely exploded 😂! (I posted these a little later then planned, time management sometimes is not my friend!)

They are fairly simple to create. The paper I used (Linen Specialty Paper )for both of these is sadly no longer available but you could use any of our gorgeous Designer Series Paper, or any of the specialties to create a backdrop for your design. I also used an actual stick that Miss Daisy helped me find in our yard (she was slightly offended that I brought it inside 🤣) as the hanger.

The NOEL hanging is shimmery and bright, perfect for the festive season. The Warm Wishes hanging is more winter, calm, peacefulness and warmth.

I was really wanting you guys to see how you can take any project you find, a pattern, and idea on Pinterest, something you want to CASE from me, you can change things up completely and make it yours!

—————————————————————————————————————————

Day 3 of our 12 Days of Christmas Projects!

This project we are kicking  it back old school with just Stamps Ink and Paper and a few embellishments of course. Speaking of embellishments, please note there is a tiny red bow on the card front. I did that! Without the assistance of a fork! Its the little things sometimes 🙃

This card was fun to create. It’s nice to fall back to the basics, regroup your mind and inspiration.

General overview of this card, I used the Joy of Noel stamp set. I also used our Stampin’ Blends for the coloring.

This card would be super simple to create in large quantities. Simple yet elegant, just the way it should be.

—————————————————————————————————————————

I had an awesome big brain moment and figured out how to share a link to the file for the tutorials! I truly need an adultier adult sometimes!

Here is the link to the file: 12 Days of Christmas Project Tutorials

As I get new ones completed the file will automatically update and I will let you know when that happens so you can grab it!

These tutorials are FREE, a gift from me to you for the holidays and hopefully future special occasions!

I will get the rest of the projects uploaded here hopefully tomorrow!

Happy Stamping!!